From: Julian Grunnell (julian.grunnell@pipex.net)
Date: Thu Mar 03 2005 - 10:47:33 EST
Update on my E220R problem. Have got some diagnostics output from the
server which can be seen below. A suggestion came through to maybe try &
do a boot cdrom from the ok prompt. But still no joy. It just stops at
the Initializing memory stage.
Again any help would be appreciated.
Hardware Power ON
Master CPU online
Slave-Offline!
Slave Offline, disabled`
Button Power ON
Master CPU online
Slave-Offline!
Slave Offline, disabled
Probing keyboard Done
%o0 = 0000.0000.0000.2001
Executing Power On SelfTest
0>
0>@(#) Sun Ultra 60(UltraSPARC-II 2-way) UPA/PCI POST 2.0.2 10/19/1998
0>10:46 AM
0>INFO: Processor 0 is master.
0>
0> <00> Init System BSS
0> <00> NVRAM Battery Detect Test
0> <00> NVRAM Scratch Addr Test
0> <00> DMMU TLB Tag Access Test
0> <00> DMMU TLB RAM Access Test
0> <00> IMMU TLB Tag Access Test
0> <00> IMMU TLB RAM Access Test
0> <00> Probe Ecache
0>INFO: CPU 360 MHz: 4096KB Ecache
0> <00> Ecache RAM Addr Test
0> <00> Ecache Tag Addr Test
0> <00> Ecache Tag Test
0> <00> Invalidate Ecache Tags
0>INFO: Processor 2 is missing or disabled.
0> <00> Init SC Regs
0> <00> SC Address Reg Test
0> <00> SC Reg Index Test
0> <00> SC Regs Test
0> <00> SC Dtag RAM Addr Test
0> <00> SC Cache Size Init
0> <00> SC Dtag RAM Data Test
0> <00> SC Dtag Init
0> <00> Probe Memory
0>INFO: 0MB Bank 0
0>INFO: 0MB Bank 1
0>INFO: 0MB Bank 2
0>INFO: 256MB Bank 3
0> <00> Malloc Post Memory
0> <00> Init Post Memory
0> <00> Post Memory Addr Test
0> <00> Map PROM/STACK/NVRAM in DMMU
0> <00> Memory Stack Test
0> <00> DMMU Hit/Miss Test
0> <00> IMMU Hit/Miss Test
0> <00> DMMU Little Endian Test
0> <00> IU ASI Access Test
0> <00> FPU ASI Access Test
0> <1f> Init Psycho
0> <1f> PIO Read Error, Master Abort Test
0> <1f> PIO Read Error, Target Abort Test
0> <1f> PIO Write Error, Master Abort Test
0> <1f> PIO Write Error, Target Abort Test
0> <1f> Timer Increment Test
0> <00> Copy Post to Memory
0> <00> Ecache Thrash Test
0> <00> Init Memory
0> <00> Memory Addr w/ Ecache Test
0>INFO: 0MB Bank 0
0>INFO: 0MB Bank 1
0>INFO: 0MB Bank 2
0>INFO: 256MB Bank 3
0> <00> Block Memory Addr Test
0>INFO: 0MB Bank 0
0>INFO: 0MB Bank 1
0>INFO: 0MB Bank 2
0>INFO: 256MB Bank 3
0> <00> ECC Memory Addr Test
0>INFO: 0MB Bank 0
0>INFO: 0MB Bank 1
0>INFO: 0MB Bank 2
0>INFO: 256MB Bank 3
0> <00> Memory Status Test
0>INFO: 0MB Bank 0
0>INFO: 0MB Bank 1
0>INFO: 0MB Bank 2
0>INFO: 256MB Bank 3
0> <00> V9 Instruction Test
0> <00> CPU Tick and Tick Compare Reg Test
0> <00> CPU Soft Trap Test
0> <00> CPU Softint Reg and Int Test
0> <1f> Init Psycho
0> <1f> Psycho Cntl and UPA Reg Test
0> <1f> Psycho DMA Scoreboard Reg Test
0> <1f> Psycho Perf Cntl Reg Test
0> <1f> PIO Decoder and BCT Test
0> <1f> PCI Byte Enable Test
0> <1f> Counter/Timer Limit Regs Test
0> <1f> Timer Reload Test
0> <1f> Timer Periodic Test
0> <1f> Mondo Int Map (short) Reg Test
0> <1f> Mondo Int Set/Clr Reg Test
0> <1f> Psycho IOMMU Regs Test
0> <1f> Psycho IOMMU RAM Address Test
0> <1f> Psycho IOMMU CAM Address Test
0> <1f> IOMMU TLB Compare Test
0> <1f> IOMMU TLB Flush Test
0> <1f> Stream Buff A Control Reg Test
0> <1f> Psycho ScacheA Page Tag Addr Test
0> <1f> Psycho ScacheA Line Tag Addr Test
0> <1f> Psycho ScacheA RAM Addr Test
0> <1f> Psycho ScacheA Error Status NTA Test
0> <1f> Psycho ScacheB Page Tag Addr Test
0> <1f> Psycho ScacheB Line Tag Addr Test
0> <1f> Psycho ScacheB RAM Addr Test
0> <1f> Psycho ScacheB Error Status NTA Test
0> <1f> PBMA PCI Config Space Regs Test
0> <1f> PBMA Control/Status Reg Test
0> <1f> PBMA Diag Reg Test
0> <1f> PBMB PCI Config Space Regs Test
0> <1f> PBMB Control/Status Reg Test
0> <1f> PBMB Diag Reg Test
0> <00> UltraSPARC-2 Prefetch Instructions Test
0> <00> Test 0: prefetch_mr
0> Unexpected event occurred - Trap
0> tl tt tstate tpc tnpc
0> 01 63 00000000.80001604 ffffffff.f009b94c ffffffff.f009b950
0> AFSR 00000000.00100000
0> AFAR 00000000.a009b940
0> (CE) Correctable ECC Error
0> SDBH = 00000000.00000012 SDBL = 00000000.00000134
0>
Failing address in SIMM Pair a, SIMM 0
0> Unexpected event occurred - Trap
0> tl tt tstate tpc tnpc
0> 01 63 00000044.80001603 ffffffff.f009915c ffffffff.f0099160
0> AFSR 00000000.00100000
0> AFAR 00000000.a0099140
0> (CE) Correctable ECC Error
0> SDBH = 00000000.00000012 SDBL = 00000000.00000134
0>
Failing address in SIMM Pair a, SIMM 0
0> Unexpected event occurred - Trap
0> tl tt tstate tpc tnpc
0> 01 63 00000044.80001604 ffffffff.f009bb00 ffffffff.f009bb04
0> AFSR 00000000.00100000
0> AFAR 00000000.a009bb00
0> (CE) Correctable ECC Error
0> SDBH = 00000000.00000012 SDBL = 00000000.00000134
0>
Failing address in SIMM Pair a, SIMM 0
0> Unexpected event occurred - Trap
0> tl tt tstate tpc tnpc
0> 01 63 00000000.80001605 ffffffff.f00867a4 ffffffff.f00867a8
0> AFSR 00000000.00100000
0> AFAR 00000000.a00b8600
0> (CE) Correctable ECC Error
0> SDBH = 00000000.00000012 SDBL = 00000000.00000134
0>
Failing address in SIMM Pair a, SIMM 0
SSTATUS =FAILED
0>TEST =UltraSPARC-2 Prefetch Instructions
TTF =0
PASSES =1
ERRORS =1
SUSPECT Unexpected event occurred - Trap
0> tl tt tstate tpc tnpc
0> 01 63 00000044.80001605 ffffffff.f0086790 ffffffff.f0086794
0> AFSR 00000000.00100000
0> AFAR 00000000.a00b8680
0> (CE) Correctable ECC Error
0> SDBH = 00000000.00000012 SDBL = 00000000.00000134
0>
Failing address in SIMM Pair a, SIMM 0
0>MESSAGE= Unexpected event occurred - Trap
0> tl tt tstate tpc tnpc
0> 01 63 00000000.80001605 ffffffff.f0086790 ffffffff.f0086794
0> AFSR 00000000.00100000
0> AFAR 00000000.a00ba040
0> (CE) Correctable ECC Error
0> SDBH = 00000000.00000012 SDBL = 00000000.00000134
0>
Failing address in SIMM Pair a, SIMM 0
ETAG_EXCLUSIVE(T0) Tag compare error.
addr 00000000.a0802000
expected 1cc01410
observed a0802000
xor bc403410
0> Unexpected event occurred - Trap
0> tl tt tstate tpc tnpc
0> 01 63 00000044.80001601 ffffffff.f0086790 ffffffff.f0086794
0> AFSR 00000000.00100000
0> AFAR 00000000.a00b3200
0> (CE) Correctable ECC Error
0> SDBH = 00000000.00000012 SDBL = 00000000.00000134
0>
Failing address in SIMM Pair a, SIMM 0
Power On Selftest Completed
Status = 0000.0000.0000.0001 ffff.ffff.f00b.3b18
ff9f.ffff.0bd1.1101` Software Power ON Master CPU online Slave-Offline!
Slave Offline, disabled
@(#) UPA/PCI 3.23 Version 1 created 1999/07/16 12:08
Clearing DTAGS Done
Probing Memory Done
MEM BASE = 0000.0000.a000.0000
MEM SIZE = 0000.0000.1000.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.2800
PC = 0000.0000.0000.2844
Decompressing into Memory Done
Size = 0000.0000.0006.eb80
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1
POR:0
Probing Memory Bank #0 0 0 0 0 : 0 Megabytes
Probing Memory Bank #1 0 0 0 0 : 0 Megabytes
Probing Memory Bank #2 0 0 0 0 : 0 Megabytes
Probing Memory Bank #3 64 64 64 64 : 256 Megabytes
Probing Floppy: No drives detected
Probing EBUS Nothing there
Probing UPA Slot at 1e,0 Nothing there
Probing UPA Slot at 1d,0 Nothing there
Probing /pci@1f,4000 at Device 1 pci108e,1000 network
Probing /pci@1f,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 2 Nothing there
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,4000 at Device 5 pci108e,1000 SUNW,hme
Probing /pci@1f,2000 at Device 1 Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1
POR:0
Probing Memory Bank #0 0 0 0 0 : 0 Megabytes
Probing Memory Bank #1 0 0 0 0 : 0 Megabytes
Probing Memory Bank #2 0 0 0 0 : 0 Megabytes
Probing Memory Bank #3 64 64 64 64 : 256 Megabytes
Probing Floppy: No drives detected
Probing EBUS Nothing there
Probing UPA Slot at 1e,0 Nothing there
Probing UPA Slot at 1d,0 Nothing there
Probing /pci@1f,4000 at Device 1 pci108e,1000 network
Probing /pci@1f,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@1f,4000 at Device 2 Nothing there
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,4000 at Device 5 pci108e,1000 SUNW,hme
Probing /pci@1f,2000 at Device 1 Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Sun Enterprise 220R (UltraSPARC-II 360MHz), No Keyboard OpenBoot 3.23,
256 MB memory installed, Serial #13548408. Ethernet address
8:0:20:ce:bb:78, Host ID: 80cebb78.
Initializing 255 megs of memory at addr
**********************************************************
ok printenv
Variable Name Value Default Value
scsi-initiator-id 7 7
keyboard-click? false false
keymap
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
pcia-probe-list 1,2 1
pcib-probe-list 1,3,2,4,5 1,3,2,4,5
enclosure-type 540-4284
banner-name Sun Enterprise 220R
energystar-enabled? false
mfg-mode off off
diag-level min min
#power-cycles 59
system-board-serial# 5015606101404
system-board-date 39f50481
fcode-debug? false false
output-device screen screen
input-device keyboard keyboard
load-base 16384 16384
boot-command boot boot
auto-boot? true true
watchdog-reboot? false false
diag-file
diag-device net net
boot-file
boot-device disk1:a disk net disk net
local-mac-address? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? false false
nvramrc
security-mode none
security-password
security-#badlogins 0
oem-logo
oem-logo? false false
oem-banner
oem-banner? false false
hardware-revision
last-hardware-update
diag-switch? true false
ok probe-scsi
Target 0
Unit 0 Disk FUJITSU MAJ3182M SUN18G 0804
Target 1
Unit 0 Disk SEAGATE ST318203LSUN18G 034A
Target 6
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011007
ok probe-scsi-all
/pci@1f,4000/scsi@3,1
/pci@1f,4000/scsi@3
Target 0
Unit 0 Disk FUJITSU MAJ3182M SUN18G 0804
Target 1
Unit 0 Disk SEAGATE ST318203LSUN18G 034A
Target 6
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011007
ok test-all
Testing /pci@1f,4000/SUNW,hme@5,1
Internal loopback test -- succeeded.
Transceiver check -- failed
Selftest failed. Return code = -1
Testing /pci@1f,4000/scsi@3,1
No targets found
Selftest failed. Return code = -1
Testing /pci@1f,4000/scsi@3
Testing /pci@1f,4000/network@1,1
Internal loopback test -- succeeded.
Transceiver check -- passed
Testing /pci@1f,4000/ebus@1/fdthree@14,3023f0
Testing floppy disk system. A formatted disk should be in the drive.
Recalibrate failed. The floppy drive is either missing, improperly
connected, or defective. Selftest failed. Return code = -1
ok
Thanks - Julian.
-----Original Message-----
From: Julian Grunnell [mailto:julian.grunnell@pipex.net]
Sent: Thursday, March 03, 2005 12:01 PM
To: sunmanagers@sunmanagers.org
Subject: Sun E220R won't boot
Hi - have just moved one of our Sun E220R's between data centres and now
it won't boot?
Spec. is:
Sun E220R
256mb RAM
2 x scsi disks
1 x 360mhz cpu
Solaris 9
Server powered down ok, moved to new location + switched on.
All I got was "Data access error".
So switched server off, took lid off & just checked memory, cpu's etc
were seated which they appeared to be. And powered the server back on.
Now I get the startup banner + "Initializing memory" which completes,
but then nothing?
I managed to get the server to the ok prompt + did a probe-scsi-all
which shows my 2 scsi drives + cd rom which is all correct.
But again if I try to "boot" it never gets further than the
"Initializing memory" stage.
Any ideas?
Thanks in advance - Julian.
Julian Grunnell
3rd Line Technical Support
PIPEX
Telephone: 0113 302 1005
Mobile: 07803 649593
Website: http://www.pipex.net
Julian Grunnell
3rd Line Technical Support
PIPEX
Telephone: 0113 302 1005
Mobile: 07803 649593
Website: http://www.pipex.net
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:17 EDT