Disk Array 3310

From: Sun Student (studentofsun@gmail.com)
Date: Thu Feb 24 2005 - 16:38:10 EST

• Next message: Alejandro Almaraz García: "Hard Fisk Fail"
• Previous message: egold@fsa.com: "need to create a gui front end for my scripts."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Gurus,

I recentally installed a Sun StorEdge 3310 SCSI Disk Array to a Sun
Netra 20 Server.
I partitioned the 12 disk to have 2 logical drives of 5 disk each use
RAID5 and 2 global spares.
I only have one controller in the Netra Server but I guess the Disk
Array has two. I connected the Disk Array in a Single Bus
Configuration and attached port 1 of the disk array to the SCSI
Controller on the Netra Server.

Now when I do format on Netra Server, this is what I see:

format
Searching for disks...done

AVAILABLE DISK SELECTIONS:
      0. c1t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
         /pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w210000008712654a,0
      1. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
         /pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w210000008711e392,0
      2. c3t1d0 <drive type unknown>
         /pci@8,600000/pci@1/scsi@4/sd@1,0

I can see that Netra server has identified the Disk Array but why
unknown drive type.

Can you please suggest a solution to this issue?

Thanks
Student
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Alejandro Almaraz García: "Hard Fisk Fail"
• Previous message: egold@fsa.com: "need to create a gui front end for my scripts."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:13 EDT