From: Michael (grice@binc.net)
Date: Thu Feb 24 2005 - 14:17:03 EST
One of my colleagues and I are having an issue with a QLA2342 dual-port
HBA. These are on a V240 running Solaris 9 attached to an IBM FAStT.
The OS can see the LUN's, but the disk geometry doesn't show up when you
run format. You can't partition the LUN's, either.
However, the LUN's look perfectly fine in the SAN Surfer GUI.
The SAN foundation kit has been installed, and we're using the qla2300
drivers from Qlogic. Initially there was a problem with the SUN qlogic
drivers getting picked up.
Ironically, we have a similar card working just fine on a V210. We have
not been able to detect any significant differences between the two
servers in terms of the drivers, the firmware or configuration.
Anyone have any thoughts on this?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:13 EDT