SUMMARY: Problems with Solaris 8, RAID Manager 6.22 & SBU/LGT SCS I Passthru Drivers

From: Caparroso, Nelson T. (AAS) (Nelson.T.Caparroso@sbcdo.com)
Date: Mon Jun 17 2002 - 15:04:05 EDT


I've researched several fixes and workarounds as follows:

- disable rdriver/rdac during Legato Setup and 3P software install that does
an add_drv, etc.
- modify lus.conf so that it does binds to a known lun/path
- modify /kernel/drv rdriver.conf and rdnexus.conf for what are actually
present (bus/luns.controllers..)

There were also several references on SunSolve relating to lus interacting
with RM...

Thanks to some that recommended some measures...

> -----Original Message-----
> List:
>
> We attempted a Solaris 8 upgrade of a UE4500 server with a A3500 array
> (RM 622) and which also has connections via FC point-to-point (JNI hba's)
> to a HDS array. Along with this is a standard Stogane Node Install of
> SBU/Networker 6.1.1 which meant installing the SCSI passthru driver
> (lus..) as well as other software that installs some pseudo drivers (ie.
> TotalNet Advanced Server). But we are having all sorts of problems the
> most severe of which are:
>
> - reboot times are horribly slow
> - Legato configuration is also slow (part where it probably calls the
> "inquire" command, which is really slow..)
> - installation of other software is really - really slow - specially with
> those that installs drivers or pseudo drivers
>
> Here is the procedure we used:
> - Install OS
> - Install HBA driver for HDS LUN
> - edit sd.conf/st.conf (HDS have luns 0-255 for targets 0-3, A3500 have
> luns 0-6 for targets 0-1)
> - Reboot
> - All LUNS from HDS and Amdahl appear in format
> - Install Rm622 software... takes about 30 minutes..
> - Reboot -- takes about 1 hour
> - checked LUN's via "lad" and "healthck" -- all okay
> - Install Networker 6.1.1 (Storgae Node, Client, SCSI drivers, Man
> page...) takes 30 minutes...
> - Reboot (reconfiguration as install created a /reconfigure file..)
> - Takes about 2 hours
> - Test running LGT "inquire" ... does not complete just hangs and takes a
> long time to CTRL-C...
> - so much for Legato install and jbconfig... try installing TotalNET which
> installs some form of a pseudo device driver... just seem to hang and
> noticed devfsadm, picld and add_drv very active...
>
> I have a reason to believe the culprit here is RM622's rdriver as it tries
> to bind to all LUNS it sees... Any tips/ideas/workarounds for this
> problem?
>
> Thanks.
>
>
> NELSON
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:28 EDT