From: Anjan Dave (adave@vantage.com)
Date: Tue Feb 15 2005 - 16:35:00 EST
Hi,
I am trying to connect a newly configured T3+ to a 220r host (SunOS hostname 5.7 Generic_106541-21 sun4u sparc SUNW,Ultra-60) HBA.
The Array has the volume created, and mounted, and the health of the array is fine-
<4>vol mode
volume mounted cache mirror
vol-raid5 yes writebehind off
The connection is a mm fiber LC to SC from T3 to HBA. Array is online, and the connectors fit only one-way, so TX/RX should be fine.
The luxadm command is not finding any enclosures:
# luxadm insert
Please hit <RETURN> when you have finished adding Fibre Channel Enclosure(s)/Device(s):
Waiting for Loop Initialization to complete...
No new device(s) were added!!
No new enclosure(s) were added!!
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1f,4000/scsi@3/sd@0,0
1. c0t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1f,4000/scsi@3/sd@1,0
Specify disk (enter its number):
Is there any troubleshooting/verfication of things i can do before resorting to a 'boot -r'? This is an online system and i would prefer not to reboot it if possible.
Thanks!
Anjan
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:30:10 EDT