From: sunny (hellozappy2k@yahoo.com)
Date: Mon Jan 10 2005 - 09:37:27 EST
I am trying to install 3510 Storage on Solaris 2.8 (
280R) system, I have installed the Qlogic card and
it's driver but unable to see the storage on my
Solaris format command. I have the below output of
cfgadm -al :
Ap_Id Type Receptacle
Occupant Condition
c0 scsi-bus connected
configured unknown
c0::dsk/c0t0d0 disk connected
configured unknown
c0::dsk/c0t1d0 disk connected
configured unknown
c0::dsk/c0t6d0 CD-ROM connected
configured unknown
c1 scsi-bus connected
unconfigured unknown
c2 scsi-bus connected
configured unknown
c2::es/ses0 disk connected
configured unknown
c2::osa/dev/dsk/c1t5d0s0 disk connected
configured unknown
c3 scsi-bus connected
unconfigured unknown
Can any one help me to figure out what needs to be
done to get the FC Array visible in the OS.
TIA,
Regards
Sunny
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:58 EDT