From: Ed Guenther (guenthere@yahoo.com)
Date: Thu Jan 06 2005 - 13:03:33 EST
I've opened a case with Sun on this problem but they
don't feel it's urgent. So....
I have several new v20z and v40z's here. I installed
one box with Solaris 10 beta 72. I created a flash
archive with:
flarcreate -s -n install /install.flar
I booted a second v20z (client) and connected it to
the first using a crossover cable. I booted the
client from the Sol10 install cd and opted to install
using a flar image. The system finds the flar master
server, copies the image but then gives me this error:
"Could not extract flash archive" and the install
bombs out.
I've looked through the archives of this list and
found one similar case but his solution doesn't solve
my problem.
I even feel that I know why this message occurs! The
root partition must be big enough to hold the entire
flar. But I do not want the root parition to be 3
gig! It's wasted space that I need on other
filesystems.
I confirmed that this is the problem by allowing the
system to have three gig in /root. The flar worked
and the system installed.
I've contacted sun about this but they feel that hard
drive space is cheap so why bother? Just waste the
space and move on.
Does anyone have a solution so that I can use only 500
meg for the /root partition? This is very urgent.
-Ed.
__________________________________
Do you Yahoo!?
The all-new My Yahoo! - What will yours do?
http://my.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:57 EDT