From: Christophe Dupre (duprec@scorec.rpi.edu)
Date: Wed Jan 05 2005 - 15:39:31 EST
I'm trying to upgrade the internal disks of a Netra X1 to use as an FTP
server. I took out the factory 20GB disk and replaced it with a new 160GB
disk (Seagate ST3160023A). The disk is seen properly from openboot:
ok probe-ide
Device 0 ( Primary Master )
ATA Model: ST3160023A
but format sees the disk as having only 0.5GB:
Primary label contents:
Volume name = < >
ascii name = <ST3160023A cyl 255 alt 2 hd 16 sec 255>
pcyl = 257
ncyl = 255
acyl = 2
nhead = 16
nsect = 255
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wm 0 0 (0/0/0) 0
2 backup wu 0 - 254 508.01MB (255/0/0) 1040400
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
I have several V100 with disks upgraded to 80GB without problem, so what's
going on with this one ?
-- Christophe Dupre System Administrator, Scientific Computation Research Center Rensselaer Polytechnic Institute Troy, NY USA Phone: (518) 276-2578 - Fax: (518) 276-4886 _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:57 EDT