100 MB/s FDX on a Netra AC200

From: Newton, David (David.Newton@divine.com)
Date: Thu Jun 13 2002 - 13:52:36 EDT

• Next message: Jignesh Pathak: "Accessing Windows NT resources from Solaris Box"
• Previous message: Tamer Yousef: "nice group"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all,
 
I'm looking to force my AC200's to 100 MB/s FDx. The commands I use in the /etc/system file for the hme and qfe interfaces do not work for the eri's. Does anyone have any suggestions? I would prefer to use something in the /etc/system file and not ndd commands.
 
These commands do not seem to work for duplexing:

set eri:eri_adv_autoneg_cap=0

set eri:eri_adv_100T4_cap=0

set eri:eri_adv_100fdx_cap=1

set eri:eri_adv_100hdx_cap=0

set eri:eri_adv_10fdx_cap=0

set eri:eri_adv_10hdx_cap=0

Regards,

Dave Newton
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Jignesh Pathak: "Accessing Windows NT resources from Solaris Box"
• Previous message: Tamer Yousef: "nice group"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:27 EDT