From: Sebastien Daubigne (sebastien.daubigne@atosorigin.com)
Date: Mon Dec 13 2004 - 11:44:18 EST
Hi,
I apologize for this repost, but we've had a large email server nightmare,
and each potential answer was probably lost before I had any chance to get
it.
If someone would have replied to my question, could you be kind enough to
send it again ?
Here was the question :
We currently have a Sun T3+ which is not connected to the network.
We're going to connect it soon : is there any chance that the T3 could get
its IP (via RARP) without rebooting the T3, when the cable will be plugged,
or are we forced to reboot it ?
Another question : Is the T3+ console connector pinout (RJ45) the same as a
Sun Fire V480 ?
Thank you.
-- Sebastien DAUBIGNE Sebastien.daubigne@atosorigin.com - +33(0)5.57.26.56.36 AtosOrigin Infogerance - IMS/ERP/Pessac _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:51 EDT