From: Julian Grunnell (julian.grunnell@pipex.net)
Date: Tue Nov 23 2004 - 04:25:10 EST
Hi - can anyone please help me with some errors that have just been seen
on one of our web servers:
Nov 18 01:16:04 g-web1 scsi: [ID 365881 kern.info] /pci@6,4000/scsi@2
(glm2):
Nov 18 01:16:04 g-web1 Cmd (0x2304828) dump for Target 2 Lun 0:
Nov 18 01:16:04 g-web1 scsi: [ID 365881 kern.info] /pci@6,4000/scsi@2
(glm2):
Nov 18 01:16:04 g-web1 cdb=[ 0x0 0x0 0x0 0x0 0x0 0x0 ]
Nov 18 01:16:04 g-web1 scsi: [ID 365881 kern.info] /pci@6,4000/scsi@2
(glm2):
Nov 18 01:16:04 g-web1 pkt_flags=0x14000 pkt_statistics=0x61
pkt_state=0x7
Nov 18 01:16:04 g-web1 scsi: [ID 365881 kern.info] /pci@6,4000/scsi@2
(glm2):
Nov 18 01:16:04 g-web1 pkt_scbp=0x0 cmd_flags=0xe1
Nov 18 01:16:04 g-web1 scsi: [ID 107833 kern.warning] WARNING:
/pci@6,4000/scsi@2 (glm2):
Nov 18 01:16:04 g-web1 Disconnected tagged cmd(s) (1) timeout for
Target 2.0
Nov 18 01:16:04 g-web1 genunix: [ID 408822 kern.info] NOTICE: glm2:
fault detected in device; service still available
Nov 18 01:16:04 g-web1 genunix: [ID 611667 kern.info] NOTICE: glm2:
Disconnected tagged cmd(s) (1) timeout for Target 2.0
Nov 18 01:16:04 g-web1 glm: [ID 401478 kern.warning] WARNING:
ID[SUNWpd.glm.cmd_timeout.6018]
Nov 18 01:16:04 g-web1 scsi: [ID 107833 kern.warning] WARNING:
/pci@6,4000/scsi@2 (glm2):
Nov 18 01:16:04 g-web1 got SCSI bus reset
Nov 18 01:16:04 g-web1 genunix: [ID 408822 kern.info] NOTICE: glm2:
fault detected in device; service still available
Nov 18 01:16:04 g-web1 genunix: [ID 611667 kern.info] NOTICE: glm2: got
SCSI bus reset
Nov 23 04:21:06 g-web1 scsi: [ID 365881 kern.info] /pci@6,4000/scsi@2
(glm2):
Nov 23 04:21:06 g-web1 Cmd (0x3c0c680) dump for Target 2 Lun 0:
Nov 23 04:21:06 g-web1 scsi: [ID 365881 kern.info] /pci@6,4000/scsi@2
(glm2):
Nov 23 04:21:06 g-web1 cdb=[ 0x0 0x0 0x0 0x0 0x0 0x0 ]
Nov 23 04:21:06 g-web1 scsi: [ID 365881 kern.info] /pci@6,4000/scsi@2
(glm2):
Nov 23 04:21:06 g-web1 pkt_flags=0x14000 pkt_statistics=0x61
pkt_state=0x7
Nov 23 04:21:06 g-web1 scsi: [ID 365881 kern.info] /pci@6,4000/scsi@2
(glm2):
Nov 23 04:21:06 g-web1 pkt_scbp=0x0 cmd_flags=0xe1
Nov 23 04:21:06 g-web1 scsi: [ID 107833 kern.warning] WARNING:
/pci@6,4000/scsi@2 (glm2):
Nov 23 04:21:06 g-web1 Disconnected tagged cmd(s) (1) timeout for
Target 2.0
Nov 23 04:21:06 g-web1 genunix: [ID 408822 kern.info] NOTICE: glm2:
fault detected in device; service still available
Nov 23 04:21:06 g-web1 genunix: [ID 611667 kern.info] NOTICE: glm2:
Disconnected tagged cmd(s) (1) timeout for Target 2.0
Nov 23 04:21:06 g-web1 glm: [ID 401478 kern.warning] WARNING:
ID[SUNWpd.glm.cmd_timeout.6018]
Nov 23 04:21:06 g-web1 scsi: [ID 107833 kern.warning] WARNING:
/pci@6,4000/scsi@2 (glm2):
Nov 23 04:21:06 g-web1 got SCSI bus reset
Nov 23 04:21:06 g-web1 genunix: [ID 408822 kern.info] NOTICE: glm2:
fault detected in device; service still available
Nov 23 04:21:06 g-web1 genunix: [ID 611667 kern.info] NOTICE: glm2: got
SCSI bus reset
Nov 23 05:22:14 g-web1 pseudo: [ID 129642 kern.info] pseudo-device:
devinfo0
Nov 23 05:22:14 g-web1 genunix: [ID 936769 kern.info] devinfo0 is
/pseudo/devinfo@0
** Platform **
System Configuration: Sun Microsystems sun4u
Memory size: 2048 Megabytes
System Peripherals (Software Nodes):
SUNW,Ultra-4
options, instance #0
pci, instance #0
ebus, instance #0
se, instance #0
su, instance #0
su, instance #1
fdthree, instance #0
SUNW,envctrl, instance #0
network, instance #0
scsi, instance #0
sd, instance #0
sd, instance #1
sd, instance #2
sd, instance #3
scsi, instance #1
sd, instance #21
TSI,gfxp, instance #0
pci, instance #1
pci, instance #2
pci, instance #3
pci, instance #4
scsi, instance #2
sd, instance #30
sd, instance #31
sd, instance #32
sd, instance #33
scsi, instance #3
pci, instance #5
pseudo, instance #0
SunOS g-web1 5.8 Generic_108528-19 sun4u sparc SUNW,Ultra-4
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@1f,4000/scsi@3/sd@0,0
1. c0t1d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@1f,4000/scsi@3/sd@1,0
2. c0t2d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@1f,4000/scsi@3/sd@2,0
3. c0t3d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@1f,4000/scsi@3/sd@3,0
4. c2t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@6,4000/scsi@2/sd@0,0
5. c2t1d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@6,4000/scsi@2/sd@1,0
6. c2t2d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@6,4000/scsi@2/sd@2,0
7. c2t3d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci@6,4000/scsi@2/sd@3,0
bash-2.03# iostat -En
c0t0d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: FUJITSU Product: MAG3182L SUN18G Revision: 1111 Serial No:
02500395
Size: 18.11GB <18110967808 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c0t1d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST318203LSUN18G Revision: 034A Serial No:
LRC0752900001030
Size: 18.11GB <18110967808 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c0t2d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: FUJITSU Product: MAG3182L SUN18G Revision: 1111 Serial No:
01598932
Size: 18.11GB <18110967808 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c0t3d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: FUJITSU Product: MAG3182L SUN18G Revision: 1111 Serial No:
01599095
Size: 18.11GB <18110967808 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c1t6d0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: TOSHIBA Product: XM6201TASUN32XCD Revision: 1103 Serial No:
12/12/97
Size: 0.54GB <538818560 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c2t0d0 Soft Errors: 0 Hard Errors: 2 Transport Errors: 0
Vendor: FUJITSU Product: MAG3182L SUN18G Revision: 1111 Serial No:
01598837
Size: 18.11GB <18110967808 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 2 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c2t1d0 Soft Errors: 0 Hard Errors: 2 Transport Errors: 0
Vendor: FUJITSU Product: MAG3182L SUN18G Revision: 1111 Serial No:
01599115
Size: 18.11GB <18110967808 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 2 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c2t2d0 Soft Errors: 0 Hard Errors: 2 Transport Errors: 2
Vendor: SEAGATE Product: ST318203LSUN18G Revision: 034A Serial No:
LRB9463200001030
Size: 18.11GB <18110967808 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 2 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
c2t3d0 Soft Errors: 0 Hard Errors: 2 Transport Errors: 0
Vendor: SEAGATE Product: ST318203LSUN18G Revision: 034A Serial No:
LRB0739700007027
Size: 18.11GB <18110967808 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 2 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
The disks are setup with Disksuite, but the disk which I think the
errors are referring to (c2t2d0) is not part of any disksuite set. I am
just running a format / analyse on the disk at the moment to see if it
brings anything up. Looking at the iostat output does show that
Controller 2 has "2" hard errors for each disk. Maybe the Controller
itself is at fault.
Thanks in advance - Julian.
Julian Grunnell
3rd Line Technical Support
PIPEX
Telephone: 0113 302 1005
Mobile: 07803 649593
Website: http://www.pipex.net <http://www.pipex.net/>
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:45 EDT