Soalris 10 Jumpstart Issue

From: Bhavesh Shah (bshah@citadon.com)
Date: Mon Nov 22 2004 - 14:26:39 EST


Hi Gurus,

I have a Jumpstart Server setup for Solaris 2.6 Solaris 8 and Solaris 9
installation and am able to install this Operating Environment
successfully. Recently I added Solaris 10 image on tho the same
Jumpstart Server. When I install the U 60 client from Jumpstart Server
it goes to the interactive mode. I use the same sysidcfg which I use to
install Solaris 8 and Solaris 9. Please see the console output below.
Any Help/Pointer will be greatly appreciated.

Regards

B

ebooting with command: boot net - install

Boot device: /pci@1f,4000/network@1,1 File and args: - install

Timeout waiting for ARP/RARP packet

Timeout waiting for ARP/RARP packet

Timeout waiting for ARP/RARP packet

Timeout waiting for ARP/RARP packet

38400

Requesting Internet address for 8:0:20:b8:cc:24

SunOS Release 5.10 Version s10_69 64-bit

Copyright 1983-2004 Sun Microsystems, Inc. All rights reserved.

Use is subject to license terms.

whoami: no domain name

Nov 22 11:04:01 svc.startd[7]: Could not log for
svc:/milestone/name-services:de

fault: open(/var/svc/log//milestone-name-services:default.log) failed
with Read-

only file system.

Configuring devices.

Using RPC Bootparams for network configuration information.

Attempting to configure interface hme0...

Configured interface hme0

Beginning system identification...

Searching for configuration file(s)...

Using sysid configuration file
192.168.184.140:/opt/install/config//sysidcfg

Search complete.

Discovering additional network configuration...

Completing system identification..

  The Solaris installation program is divided into a series of short
sections

  where you'll be prompted to provide information for the installation.
At

  the end of each section, you'll be able to change the selections
you've

  made before continuing.

  About navigation...

        - The mouse cannot be used

        - If your keyboard does not have function keys, or they do not

          respond, press ESC; the legend at the bottom of the screen

          will change to show the ESC keys to use for navigation.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:45 EDT