Mounting drive on two systems

From: Vaddadi, Sridhar (svaddadi@road-inc.com)
Date: Mon Jun 10 2002 - 14:41:51 EDT

• Next message: MacDonell, Dennis: "Utility that will allow me to talk to an autochanger."
• Previous message: David Foster: "Compiling OpenSSH 3.2.3p1 on SunOS 4.1.4"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi SunManagers,

        I have two E250s (say A & B) connected to disk array through fiber.
I would like to mount a LUN (CxTyDz) on to systemA as Read-Write and systemB
as Read-only.

        I could mount as requires successfully, but the systemB which had
Read-only mount does not refresh the contents when contents are updated by
systemA. Once I umount the LUN from systemB and mount back again, it gets
updated contents.

        What is the best way to achieve this? Any guidance would be
appreciated.

Thanks in advance.

Sridhar Vaddadi
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: MacDonell, Dennis: "Utility that will allow me to talk to an autochanger."
• Previous message: David Foster: "Compiling OpenSSH 3.2.3p1 on SunOS 4.1.4"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:27 EDT