From: Neil Quiogue (neil@quiogue.com)
Date: Tue Nov 09 2004 - 22:10:32 EST
Hello,
I just have a few questions on Storedge T3:
1. The Power Supply was already replaced and yet when I do an
fru stat, it still sees the battery as fault. I tried the
refreshing and changing busage of u1pcu1 to no avail. The
syslog shows that it's not ok also.
2. What does it mean that the disk is in the wrong position? I
can't seem to find out any distinguishing mark on where each
disk would be placed.
3. I keep seeing a 'u2d1-d9' volume yet there's no such disks. I
tried unmount and removing it but it does not work. Somehow the
config sees it as such and I can unmount it properly:
Here's what I see:
<> vol unmount vol1
<> vol remove vol1
ERROR (200008) VN_MOUNTED: volume already mounted
Any pointers would be much appreciated.
Regards,
Neil Quiogue
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:41 EDT