From: Chris Pinnock (cjep@fawlty.net)
Date: Sat Nov 06 2004 - 09:19:53 EST
I will try updating the firmware on the RSC card on Monday, but I was
wondering if anyone else had seen the following behaviour. I have browsed
over the manuals so I suspect the following has either been fixed or is a
quirk.
I have an RSC card in an E280R with a connection from its serial port to a
terminal server (Cisco 2600 with ASync module). I can login to the RSC card
fine and perform all actions (e.g. poweroff, poweron and so on) absolutely
fine. When I logout of the RSC session, it is not possible to log back in
again - no input or output on the line. The session just hangs.
I have to reset the RSC card from Solaris to be able to use the RSC card
again. This seems wrong to me.
Has anyone else seen this?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:40 EDT