From: Philip Priest (philpriest@gmail.com)
Date: Thu Nov 04 2004 - 16:23:55 EST
I have a 2 disk config that is mirrored with disksuite.
I plan to do a fresh install on solaris 9 on one of the drives.
after which i just wanna mount the other drive so i can copy files i
need for the solaris 9 install.
this is my metastat:
d0: Mirror
Submirror 0: d10
State: Okay
Submirror 1: d20
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 76047120 blocks
d10: Submirror of d0
State: Okay
Size: 76047120 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c0t0d0s0 0 No Okay
d20: Submirror of d0
State: Okay
Size: 76047120 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c0t2d0s0 0 No Okay
d1: Mirror
Submirror 0: d11
State: Okay
Submirror 1: d21
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 2101200 blocks
d11: Submirror of d1
State: Okay
Size: 2101200 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c0t0d0s1 0 No Okay
d21: Submirror of d1
State: Okay
Size: 2101200 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c0t2d0s1 0 No Okay
What is see that i have to do is:
metadetach d20
metadetach d21
is this all i have to do?
thanks!
Phil
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:40 EDT