From: Grant Lowe (glowe@sbcglobal.net)
Date: Tue Oct 26 2004 - 15:12:11 EDT
Hi gurus.
I've got an A5000 disk under Veritas control. The array is showing a failed disk on the front panel as well as the light above the disk is orange. Its having some weird behavior problems. I do a vxdisk list, I see the failed disk:
c3t83d0s2 sliced - - error
However, under format, the disk doesn't show up. I ran devfsadm and the disk still isn't showing up.
I do a luxadm display ARRAY and it shows under the (Node WWN) column) this:
3 Not Installed On (Faulted) 0000000000000000
So I figure if Veritas can't see it, then I don't have to worry about Veritas replacing it. But Using luxadm to remove gives me this:
ROOT@ccdb1-stage:[~]# luxadm remove_device CCD-1 0000000000000000
WARNING!!! Please ensure that no filesystems are mounted on these device(s).
All data on these devices should have been backed up.
Error: Device's Node WWN is not found in the WWN list.
- CCD-1.
Ideas are very much appreciated. Thanks!
Grant
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:37 EDT