From: Prashant Zanwar (pczanwar@yahoo.com)
Date: Mon Oct 25 2004 - 12:07:01 EDT
Hi,
I have tried something like below:
HBA SCSI ID : 7
I have tried putting 4 d1000 disk arrays in daisy
chain in which I could not succeed after many tries
with different SCSI ID's on the all disk array. I have
tried giving a shot to almost everything..but I get
some strange error like
script error 148, SCSI ...
I have then tried putting one by one. One array
connects corerctly, later 2nd array if I put in the
chain it start throwing error.
Is this supported config or not? If yes what SCSI ID's
shall I try for disk array.
I have tried like below:
server A ---> SCSI A (DISK ARRAY 1)
SCSI A - SCSI B (Disk ARRAY one)
SCSI B(SERVER 1) ---SCSI A (SERVER 2)
SCSI A -- SCSI B (SERVER 2)
SCSI B termination...
and so on..I never succeeded.
I believe it is just question of putting SCSI ID's as
I dont see any problem with disk array or cable.
SCSI ID for array 1 was:
1 2 3 4 5
1 0 0 1 0
Disk array 2
1 1 0 1 0
And so on..
Please reply
Thanks
Prashant
__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:36 EDT