From: N. Z. (nizan1372@yahoo.com)
Date: Thu Oct 21 2004 - 15:24:51 EDT
Hello,
I am trying ssh from one Sun/Solaris server to another
Sun/Solaris server but am unsuccessful. Turns out the
two boxes can't ping eachother. I believe my settings
are correct, the have the same netmasks AND I am able
to ping a linux box on the same netmask, so that would
rule out a bad nic/cable/etc.
Any help is greatly appreciated, I've been looking
thru documentation & forums but have not come upon a
solution so I'm asking for your help. Let me know if
you need more info. I'll summarize once resolved.
Thanks again... Here are some details:
Server A : (Solaris)
ce0:
flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu
1500 index 2
inet x.x.x.2 netmask ff000000 broadcast
10.255.255.255
ether 0:3:ba:19:33:2d
Server B : (Solaris)
hme1:
flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu
1500 index 3
inet x.x.x.3 netmask ff000000 broadcast
10.255.255.255
ether 8:0:20:ab:fc:44
Pinging from Server A to Server B :
# ping x.x.x.3
no answer from x.x.x.3
... trussing the ping process, this is repeated:
poll(0xFFBEFB60, 1, -1) Err#4
EINTR
sendto(4, "\b\0 ME5 sD1\018 A x\v Q".., 64, 32768,
0x0005C340, 16) = 64
alarm(1) = 0
setcontext(0xFFBEF848)
Received signal #14, SIGALRM, in poll() [caught]
poll(0xFFBEFB60, 1, -1) Err#4
EINTR
Pinging from Server B to Server A :
# ping x.x.x.2
no response from x.x.x.2
... and this is shown/repeated while trussing the ping
proc:
poll(0xFFBEFBA0, 1, -1) Err#4
EINTR
sendto(4, "\b\094BE1E =\010 A x\tC4".., 64, 32768,
0x0005C340, 16) = 64
alarm(1) = 0
setcontext(0xFFBEF888)
Received signal #14, SIGALRM, in poll() [caught]
poll(0xFFBEFBA0, 1, -1) Err#4
EINTR
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:36 EDT