solaris8 and fibre channel RAID

From: . . (fabiofrait3@yahoo.com)
Date: Wed Oct 20 2004 - 09:45:03 EDT


hi all,
i run a solaris 5.8 OS generic_108528-29 on a Sun 480.
 
I connected a EMC 500 RAID through two emulex lp 9802e cards.
 
After having installed the following packages (5.01 version):
 lpfc
 HBAniware
 
having added the following lines to the /kernel/drv/sd.conf file as follows:
 name="sd" parent="lpfc" target=0 lun=0;
 name="sd" parent="lpfc" target=0 lun=1;
 name="sd" parent="lpfc" target=0 lun=2;
 name="sd" parent="lpfc" target=0 lun=3;
 name="sd" parent="lpfc" target=0 lun=4;
 name="sd" parent="lpfc" target=0 lun=5;
 name="sd" parent="lpfc" target=0 lun=6;
 name="sd" parent="lpfc" target=0 lun=7;
 
and having rebooted the system (reboot -- -r)
 
i'm not able to see the RAID disks.
 
when the server is up the "format" command shows me:
 c2t0d0 <drive type unknown>
  /pci@8,600000/lpfc@1/sd@0,0
 
more, i see that the two emulex cards in the Sun480 shows the orange LED, other than the green one.
 
the probe-scsi-all command shows (at OK prompt):
 /pci@8,600000/lpfc@1
 target none ALPA WWPN 5600.0160.320.2a56
 unit 0 disk DGC LUNZ 0207
 
May anyone help me?
thanks in advance
           F
vote.yahoo.com - Register online to vote today!
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:35 EDT