From: Paul Clayton (Paul.Clayton@intec.co.za)
Date: Thu Oct 14 2004 - 02:17:15 EDT
Thanx for all the replies.
so far the only suggestion that worked, was to just use 'halt' at the command
line, as the other options did not work. I am using securecrt, but it could be
the keyboard set up that is the cause of my problem.
regards
-----Original Message-----
From: Chris Pinnock [mailto:cjep@NetBSD.org]
Sent: Wednesday, October 13, 2004 8:54 PM
To: Paul Clayton
Subject: Re: keyboard break
On Wed, Oct 13, 2004 at 03:06:52PM +0200, Paul Clayton wrote:
> This question should ilicit many response.
>
> I have a serial terminal. What key sequence to execute the break. I need to
> get into the ok> prompt.
>
It depends on the terminal application. If it is hyperterminal try CTRL-BREAK
or CTRL-SHIFT-BREAK.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:34 EDT