From: Dave Martini 1 (martini@mrpeabody.llnl.gov)
Date: Tue Sep 21 2004 - 12:49:59 EDT
I have a V250 with Solaris 9 on it.
I installed the CLI packages
1 SUNWsccli Sun StorEdge(tm) 3000 Family CLI
(sparc) 1.5.0,REV=2004.02.03.12.27
2 SUNWscsa Sun StorEdge(tm) Diagnostic Reporter daemon
(sparc) 1.5.0,REV=2004.02.03.13.26
3 SUNWscsd Sun StorEdge(tm) Configuration Service Agent
(sparc) 1.5.0,REV=2004.02.02.13.24
4 SUNWscsu Sun StorEdge(tm) Configuration Service Console
(sparc) 1.5.0,REV=2004.02.03.13.25
5 SUNWscui Sun StorEdge(tm) Diagnostic Reporter console
(sparc) 1.5.0,REV=2004.02.03.13.26
and The daemons are running
root 235 1 0 09:34:17 ? 0:00 /usr/sbin/ssmon
root 231 1 0 09:34:16 ? 0:00 /usr/sbin/ssserver
I can connect to the Array via the tip command no problem. I've configured the 3310 using
tip and can see the array no problem. I added an IP address to the 3310 and can ping the
Array from any host.
Trouble is when I execute ssconsole and add the array I get the "discovering" message
and it never connects to the array.
Are there any tricks to get ssconsole to connect to the 3310?
I was told by the SUN rep that I have to be able to telnet into the array before ssconsole
can connect. Is this correct? When I try to telnet into the array it just says trying to
connect but never does. I didn't notice any references to telnet in the CLI manual.
Thanks much!
David Martini
LLNL
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:29 EDT