From: Shen Yuguo (shenyg@ihpc.a-star.edu.sg)
Date: Mon Sep 13 2004 - 08:55:12 EDT
Hi gurus,
Is there any known issue regarding ultra 60 serial console?
I disconnected keyboard and try to boot up, the monitor shows,
no input-device, switching to ttya
then black out (which is reasonable).
But over the serial console side, nothing is show up.
Then I connect back keyboard, at ok prompt,
setenv output-device ttya
reset
Again serial side nothing at all.
"setenv output-device ttyb" tried also not working :(
Any suggestions are welcome, thanks
Shen Yuguo
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:26 EDT