SUMMARY: where to set Sol9 to truecolor

From: mohren (mohren@orn.mpg.de)
Date: Fri Aug 20 2004 - 03:36:12 EDT

• Next message: Rob De Langhe: "V480 nearly 80% Blocked on I/O when writing < 1MByte/sec to EMC/Clariion CX600 ??"
• Previous message: Steve Baker: "Console settings & eeprom"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Thanks 2 all who responded:
It's like :
Logan, David (SST - Adelaide) wrote:

I set the Xsun options in the /usr/dt/config/Xservers file thus :

   :0 Local local_uid@console root /usr/openwin/bin/Xsun :0 -nobanner
-dev /dev/ffb0 defclass truecolor defdepth 24

Btw: u should 1. make a copy of Xservers into /etc/dt/config & modify
Xservers
there.

>Hi, I got a U10/Creator3D running meager flashing 8bit Pseudocolor
>graphics under Sol9.
>Where can I switch it to truecolor?
>Sorry, dont find the right spot in all the xxx-session mess.
>_______________________________________________
>sunmanagers mailing list
>sunmanagers@sunmanagers.org
>http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Rob De Langhe: "V480 nearly 80% Blocked on I/O when writing < 1MByte/sec to EMC/Clariion CX600 ??"
• Previous message: Steve Baker: "Console settings & eeprom"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:19 EDT