From: Maddox, Andrew (MaddoxA@usec.com)
Date: Wed Aug 18 2004 - 10:03:45 EDT
Okay, I have a V480 here that I just installed a second CPU board into, to
bring it up to 4 CPUs and 16GB of memory. Did the extended POST, a
reconfigure reboot, and I'm not seeing them in mpstat, prtdiag, or any other
tool.
Prtdiag -v does show them down in the temperature section, at 0 degrees C,
so the hardware is connected but not active.
What'd I do wrong? Seems to me the last time I added a CPU to a system, I
just had to shut it down, reboot -- -r, and everything automagically came
up.
The CPU speeds do match, all 900MHz, the memory looked like it's installed
correctly, but the OS doesn't want anything to do with the new hardware.
I'm sure it's something stupid, so what'd I forget?
Thanks in advance, etc...
-- Andrew F. Maddox, Unix Systems Engineer USEC, Inc. 301-564-3360 Include 'pager' in subject line to forward to pager _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:18 EDT