From: Wolfgang Schwurack (wolf@uen.org)
Date: Tue Aug 10 2004 - 16:53:45 EDT
Hi All
Problem: I am not seeing backup library (L180) and two out of four tape
drives (LTO2) at OS level, I am see all tape drives and library at boot prom
probe-scsi-all
/pci@1d,700000/SUNW,qlc@1
************************* Fabric Attached Devices ************************
Device PortId 40500 DeviceId 8 WWPN 50060b0000204828
Lun 0 TAPE HP Ultrium 2-SCSI K342
Device PortId 40600 DeviceId 9 WWPN 50060b0000204818
Lun 0 TAPE HP Ultrium 2-SCSI K342
/pci@1c,600000/SUNW,qlc@1
************************* Fabric Attached Devices ************************
Device PortId 30000 DeviceId 8 WWPN 500104f0006e4c90
Lun 0 CHANGER STK L180 0306
Device PortId 30500 DeviceId 9 WWPN 50060b0000204934
Lun 0 TAPE HP Ultrium 2-SCSI K342
Device PortId 30600 DeviceId a WWPN 50060b0000204834
Lun 0 TAPE HP Ultrium 2-SCSI K342
Configuraton:
Server - V440
two HBA's - 2G FC PCI Single Channel Network Adapter,
connect to two 16 port switchs,
connect to two 8 port switch.
Each 8 port switch is connect to two LTO2 tape drives (four total).
One of the 8 port switch is connect to the library - L180.
Software install:
system SUNWqlc Qlogic ISP 2200/2202 Fibre Channel Device Driver
system SUNWqlcx Qlogic ISP 2200/2202 Fibre Channel Device
Driver (64 bit)
system SUNWqus QLogic Ultra3 Scsi, (Root)
system SUNWqusu QLogic Ultra3 Scsi, (Usr)
system SUNWqusux QLogic Ultra3 Scsi, (Usr) (64-bit)
system SUNWqusx QLogic Ultra3 Scsi, (Root) (64-bit)
system SUNWsan SAN Foundation Kit
devices in /dev/rmt
0@ 0cbn@ 0hn@ 0m@ 0u@ 1b@ 1cn@ 1l@ 1mb@ 1ub@
0b@ 0cn@ 0l@ 0mb@ 0ub@ 1bn@ 1h@ 1lb@ 1mbn@ 1ubn@
0bn@ 0h@ 0lb@ 0mbn@ 0ubn@ 1c@ 1hb@ 1lbn@ 1mn@ 1un@
0c@ 0hb@ 0lbn@ 0mn@ 0un@ 1cb@ 1hbn@ 1ln@ 1n@
0cb@ 0hbn@ 0ln@ 0n@ 1@ 1cbn@ 1hn@ 1m@ 1u@
The fc-fabric is connected and configured
# cfgadm -l
c5 fc-fabric connected configured
unknown
c6 fc-fabric connected configured
unknown
# luxadm -e port
Found path to 2 HBA ports
/devices/pci@1c,600000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
lines added to st.conf
"HP Ultrium 2-SCSI", "HP LTO Ultrium Generation 2", "Class_HP460"
CLASS_HP460 = 2, 0x3b, 0, 0x18659, 1, 0x42, 0x42, 0x42, 0x42, 0;
thanks
-- 0___ Wolfgang Schwurack c/ /'_ Unix System Administrator (*) \(*) University of Utah/Utah Education Network Tel: (801) 587-9444 email: wolf@uen.org _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:15 EDT