From: amit.gpt@wipro.com
Date: Tue Aug 10 2004 - 01:24:29 EDT
Hello All,
We know HPUX clustering with MC/ServiceGuard. Using the same we had configured
the xclock command to be running in the failover mode.
We want to configure the same XClock command to run in failover mode in Sun
Cluster.
we want "/usr/openwin/bin/xclock -display <client-address>:0.0" command to run
in cluster environment.
Details : We want that when we start the resource group containing this
command, it should start the resource group on first node of the cluster and
the xclock should appear on my client (whose ip-address is given as an
argument in the command).
When i kill xclock displayed on my client, it should failover to the other
node, starting the resources group and displaying the xclock again on my
client.
Currently we have configured the two node cluster, without any registered
resource groups . The scstat -v command gives us node online.
Please provide us the steps to achive the above mentioned.
Regards
Amit
Confidentiality Notice
The information contained in this electronic message and any attachments to
this message are intended
for the exclusive use of the addressee(s) and may contain confidential or
privileged information. If
you are not the intended recipient, please notify the sender at Wipro or
Mailadmin@wipro.com immediately
and destroy all copies of this message and any attachments.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:15 EDT