From: Wamala, Muhamudu (Muhamudu.Wamala@HRCC.ON.CA)
Date: Wed Jul 28 2004 - 10:50:11 EDT
Hi All,
When you query the driver "/dev/hme" using the ndd command, i.e. ndd -get
/dev/hme \?, you get a list of parameters that are configuration for that
driver. What is the difference between the information returned when you
query the following two sets of parameters:
adv_autoneg_cap (read and write)
adv_100T4_cap (read and write)
adv_100fdx_cap (read and write)
adv_100hdx_cap (read and write)
adv_10fdx_cap (read and write)
adv_10hdx_cap (read and write)
AND
autoneg_cap (read only)
100T4_cap (read only)
100fdx_cap (read only)
100hdx_cap (read only)
10fdx_cap (read only)
10hdx_cap (read only)
Thanks.
Moe
This information is directed in confidence solely to the person named above
and may not otherwise be distributed, copied or disclosed. Therefore, this
information should be considered strictly confidential. If you have received
this email in error, please notify the sender immediately via a return email
for further direction. Thank you for your assistance.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:10 EDT