From: Paul Greidanus (paul.greidanus@ualberta.ca)
Date: Wed Jun 05 2002 - 15:02:05 EDT
After playing with a few more ideas, and doing some more
troubleshooting, I'm convinced that the card is bad, and I'm going to
phone up Sun and get a new one..
Thanks to Hichael Morton and Brian Catlin for their suggestions.
Paul Greidanus wrote:
> I have a Blade 100 with 2 3d Lite graphics cards in it, connected to
> (IBM) LCD Panels. (Same problem with Sun 21" Monitors too).
> When running X in Dual-head mode on both monitors, the brightness on
> the ifb1 card seems to be way too high, but every setting I can find
> says that the cards are configured identically..
>
-- Paul Greidanus Systems Analyst - Department of Electrical and Computer Engineering 780-492-7368 paul.greidanus@ualberta.ca _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:25 EDT