prtpicl -v -c temperature-sensor on 6800

From: Richard Voss (sun-managers@nergenshuizen.nl)
Date: Wed Jul 21 2004 - 04:47:01 EDT

• Next message: Gareth Williams: "v880 and CPU/memory failure"
• Previous message: Syed Saifudeen: "SunFire 3800 CPU Borad problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello all,

On a V880 and the like, prtpicl -v -c temperature-sensor will give you
interesting info such as at what temperature your CPU will cease
functioning, such as:

<snip>
  | (53000004d7H) |
  :HighShutdownThreshold 100
  :HighWarningThreshold 95
  :LowShutdownThreshold -15
  :LowWarningThreshold -10
  :Temperature 56
  :FaultInformation NO_FAULT
  :State OK
  :_class temperature-sensor
  :name DAR8_DIE_TEMPERATURE_SENSOR
  DCS8_DIE_TEMPERATURE_SENSOR (temperature-sensor, 5300000356)
  :PSVC_PHYSICAL_DEVICE (530000127aTBL)
<snip>

On a SunFire6800 this command returns nothing. Anybody know how to find
out these thresholds on a 6800?

Thanks in advance,

Richard

-- 
Het begint met margarine, en het eindigt met de teloorgang van
alle menselijke waarden!
  -- de Volkskeuken, 28 oktober 2003
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Gareth Williams: "v880 and CPU/memory failure"
• Previous message: Syed Saifudeen: "SunFire 3800 CPU Borad problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:07 EDT