Connecting V480 and 3510

From: Adolf, Christopher (cadolf@sandia.gov)
Date: Tue Jul 13 2004 - 10:59:21 EDT


Goodmorning,
        I am attempting to connect a 3510fc to a V480. The array is fully
configured and is working fine. While at the OBP we can see the array luns
through the probe-scsi-all command; however, when we boot the V480 and run
format (also tried luxadm) it only shows the internal drives. I remember
some special configuration had to be done because the V480 internal drives
are fiber as well. Can someone please point me in the correct direction. I
looked in the archives and found references to this, unfortunately the
person never summarized.

TIA,
Chris

PS: OS = Solaris 9
     Patch Level = 112233-12
     OBP = 4.10.7

LUXADM returns:
No Network Array enclosures found in /dev/es

Found Fibre Channel device(s):
Node WWN:200000008713c252 Device Type:Disk device
Logical Path:/dev/rdsk/c1t1d0s2
Node WWN:2000000087144874 Device Type:Disk device
Logical Path:/dev/rdsk/c1t0d0s2
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:04 EDT