StorEdge 3310 Problem

From: chaharsanjay (chaharsanjay@indiatimes.com)
Date: Fri Jul 09 2004 - 02:25:09 EDT


Hi managers
i am running solaris 9 on 280R and trying to setup my sunStoredge 3310. I have created RAID 5 logic drive & two Partition as follow
Logic al Drive 0 [4db56737] RAID 5 [209253MB]
Logical Drive 0 Partition 0 [100000MB] Map 1.0.0
Logical Drive 0 Partition 0 [109253MB] Map 1.0.1
The Solaris only recognised only first partition !
I have changed the sd.conf
starting here.
name="sd" class="scsi"
target=1 lun=1;
name="sd" class="scsi"
target=1 lun=2;
name="sd" class="scsi"
target=1 lun=3;
name="sd" class="scsi"
target=1 lun=4;
name="sd" class="scsi"
target=1 lun=5;
name="sd" class="scsi"
target=1 lun=6;
name="sd" class="scsi"
target=1 lun=7;
.
.
.
name="sd" class="scsi"
target=1 lun=31;
name="sd" class="scsi"
target=3 lun=1;
name="sd" class="scsi"
target=3 lun=2;
name="sd" class="scsi"
target=3 lun=3;
name="sd" class="scsi"
target=3 lun=4;
name="sd" class="scsi"
target=3 lun=5;
name="sd" class="scsi"
target=3 lun=6;
name="sd" class="scsi"
target=3 lun=7;
name="sd" class="scsi"
target=3 lun=8;
# END additional lun entries
Output of Format command here
Searching Disks... Done
AVAILABLE DISK SELECTION:
0. c1t0d0
/pci@1c,60000/SUNW,qlc@4/fp@0,0/ssd@w5000000
1.c1t1d0
pci@1c,60000/SUNW,qlc@4/fp@0,0/ssd@w5000000
2.c3t0d0

I have map the second partition as first but I dont know why should my second LUN is not visible .
Pls. help me on that issue
thanks in advance
Sanjay Chahar

Indiatimes Email now powered by APIC Advantage. Help!
HelpClick on the image to chat with me
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:03 EDT