From: Marcel.Lauber@swisscom.com
Date: Thu Jul 08 2004 - 15:22:59 EDT
Hi Sun Managers
I start with "rsh" the script "restart.sh" on the remote host
"server2".
rsh server2 -l user restart.sh
In this script there is a command startet with nohup like "nohup
/etc/init.d/go.sh &".
(Without "nohup" the demon in "/etc/init.d/go.sh" dies after exit.)
Normally the command "nohup" sends the message "Sending output to
nohup.out" and the demon works fine.
But when the script is started with "rsh" then "nohup" does not work.
The nohup is ignored and the prompt never comes back.
After ctrl-c the prompt is back but the demon dies!
Why "nohup" dosen't work in this mode?
Marcel Lauber, Swisscom IT Services
OS: Solaris 8 2/02 s28s_u7wos_08a SPARC
HW: Sun-Fire-880
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:03 EDT