From: Glenn, May (GE Commercial Finance, NonGE) (may.glenn@gecapital.com)
Date: Wed Jul 07 2004 - 15:05:03 EDT
Good afternoon all,
Here is my summary from my earlier inquiry regarding the E4500.
Turns out that one of the boards that we were attempting to use had a deformed
female port for the midplane and was warping a pin when inserted.
It was difficult to see because of the angle of the malformation, but it turns
out that it was the problem all along..
Thank you all for your assistance and suggestions.
Glenn May
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:02 EDT