From: Wianecki, Christopher (Christopher.Wianecki@sothebys.com)
Date: Wed Jul 07 2004 - 14:53:27 EDT
I am trying to install my V210 from the network. I did setup a boot server
and when I try to connect to it I cant get it from V210
ok boot net - install
Boot device: /pci@1f,700000/network@2 File and args: - install
100 Mbps FDX Link up
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Retrying ... Check TFTP server and network setup
Retrying ... Check TFTP server and network setup
Retrying ... Check TFTP server and network setup
Retrying ... Check TFTP server and network setup
Retrying ... Check TFTP server and network setup
Retrying ... Check TFTP server and network setup
Retrying ... Check TFTP server and network setup
Does anyone have any suggestions as on where I could find where the problem
is? Both systems are conencted to the same switch. I think I did everything
by the book to setup a boot server but somehow it seems like my V210 cannot
see my boot server.
Thank you for any help or suggestions.
Chris
www.sothebys.com
**********************************************************************
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:29:01 EDT