From: Andreas Hoeschler (ahoesch@smartsoft.de)
Date: Tue Jun 29 2004 - 06:18:55 EDT
Dear managers,
thanks for the overwhelming response again. Andrew_Rotramel@cch-lis.com
suggested to put the ifconfig line in the rc3.d directory. This most
likely would have worked, since I could plump up the interface manually
after reboot without a problem. However, most others recommended to use
hostnames (versus ipaddresses) in /etc/hostname.XXX and have
corresponding entries in /etc/hosts. It seems that the scripts that run
at bootup get confused and do not plump up the interfaces automatically
if they not not have a hostname for the ipaddresses.
Thanks a lot!
Regards,
Andreas
> we have purchased a SunFire 240 with these four interfaces bge0 - bge3.
> I configured a specific ipaddress/net for bge2 but it does not come up
> during a reboot (no entry in "netstat -rn"). I can manually plump up
> the interface with
>
> ifconfig bge2 62.154.134.76 broadcast 62.154.134.79 netmask
> 255.255.255.248 plumb up
>
> It appears in "netstat -rn" and can be used. I don't understand why the
> system does not automatically plumps it up. I have
>
> /etc/hostname.bge2:
> 62.154.134.76
>
> /etc/netmasks:
> 192.168.1.0 255.255.255.0
> 10.0.0.0 255.255.255.0
> 62.154.134.72 255.255.255.248
> 212.108.168.48 255.255.255.248
>
> This seems ok to me. I have removed /etc/defaultrouter. What else can I
> check?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:57 EDT