From: Dan O'Callaghan (OcallD@cogent-dsn.com)
Date: Mon Jun 21 2004 - 10:01:51 EDT
Hi
We have a sun CBP-2040 board (basically a netra on a board) in a compact
pci chassis.
At least one pci ACULAB card id installed into the chassis but can be up
to 4 ACULAB cards.
The problem I have is, there are different drivers based on the total
number of cards installed:
i.e.
if one card installed use driver A
if two cards installed use driver B
if 3 cards installed use driver C etc.............
The drivers aren't dynamic, if you change the number of pci aculab cards
installed you have to manually change the driver.
Is there any way I can automate this process so that the system detects
the number of aculab PCI cards at boot-up and load the correct driver ?
Cheers
dan
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:54 EDT