From: Sun Fire (starcat524@yahoo.com)
Date: Mon Jun 03 2002 - 10:50:36 EDT
Dear Sun Managers,
I'v the following console messages causing my system
unable to bootup.
0>Ecache Address Bitwalk
0>Scrub and Setup Ecache
0>Setup and Enable DMMU
0>Setup DMMU Miss Handler
0>Test and Init Temp Mailbox
0>Initializing Scan Database
0>BCC: 1483203b
0>SCSI: 15060045
0>ICHIP: 0d1e203b
0>RIO: 13e5d03b
0>SCHIZO: 107be06d
0>CPMS0: 1142903b
0>CPMS1: 1142903b
0>CPMS2: 1142903b
0>CPMS3: 1142903b
0>CPMS4: 1142903b
0>CPMS5: 1142903b
0>Init I2C
0>Unquiesce Safari
0>Blast Fans
0>Set Trip Temp CPU 0 to 110C
0>MON JUNE 3 2:31:44 GMT 2
0>Safari check
0>Probe and Setup Memory
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 0 Dimm 0, J0100 side 1
0>MSG = DIMM failure Bank 0 DIMM 0 Pin 7
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 0 Dimm 0, J0100 side 1
0>MSG = DIMM failure Bank 0 DIMM 0 Pin 7
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 0 Dimm 3, J0406 side 1
0>MSG = DIMM failure Bank 0 DIMM 3 Pin 217
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 0 Dimm 3, J0406 side 1
0>MSG = DIMM failure Bank 0 DIMM 3 Pin 218
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 0 Dimm 2, J0304 side 1
0>MSG = DIMM failure Bank 0 DIMM 2 Pin 227
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 0 Dimm 2, J0304 side 1
0>MSG = DIMM failure Bank 0 DIMM 2 Pin 228
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 0 Dimm 0, J0100 side 1
0>MSG = DIMM failure Bank 0 DIMM 0 Pin 227
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 0 Dimm 0, J0100 side 1
0>MSG = DIMM failure Bank 0 DIMM 0 Pin 228
0>END_ERROR
0>WARNING: DIMM Failure detected in Bank 0
0> DIMM 0 J0100 side 1 = 0MB.
0> DIMM 1 J0202 side 1 = 0MB.
0> DIMM 2 J0304 side 1 = 0MB.
0> DIMM 3 J0406 side 1 = 256MB.
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 2 Dimm 3, J0406 side 2
0>MSG = DIMM failure Bank 2 DIMM 3 Pin 197
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 2 Dimm 3, J0406 side 2
0>MSG = DIMM failure Bank 2 DIMM 3 Pin 198
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 2 Dimm 1, J0202 side 2
0>MSG = DIMM failure Bank 2 DIMM 1 Pin 217
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 2 Dimm 1, J0202 side 2
0>MSG = DIMM failure Bank 2 DIMM 1 Pin 218
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 2 Dimm 2, J0304 side 2
0>MSG = DIMM failure Bank 2 DIMM 2 Pin 227
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 2 Dimm 2, J0304 side 2
0>MSG = DIMM failure Bank 2 DIMM 2 Pin 228
0>END_ERROR
0>WARNING: DIMM Failure detected in Bank 2
0> DIMM 0 J0100 side 2 = 256MB.
0> DIMM 1 J0202 side 2 = 0MB.
0> DIMM 2 J0304 side 2 = 0MB.
0> DIMM 3 J0406 side 2 = 256MB.
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 2 Dimm 2, J0304 side 2
0>MSG = No Memory Detected
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Memory
0>MSG =
*** Test Failed!! ***
0>END_ERROR
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Memory
0>MSG =
ERROR:1 AFSR Error 00000002.00000008, AFAR
00000000.00000030.
0>END_ERROR
0> CE bit: Correctable system data ECC error
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 0 Dimm 3, J0406 side 1
0>MSG = DIMM failure Bank 0 DIMM 3 Pin 98
0>END_ERROR
0>WARNING: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 0 Dimm 3, J0406 side 1
0>MSG = AFSR error after running test
Probe and Setup Memory.
0>END_WARNING
0>ERROR: TEST = Probe and Setup Memory
0>H/W under test = CPU0 Bank 0 Dimm 3, J0406 side 1
0>MSG = ERROR: Memory error on master CPU, rolling
over to new master.
0>END_ERROR
0>ERROR: No good CPUs left! Calling debug
menu.
0> 0 Peek/Poke interface
0> 1 Dump CPU Regs
0> 2 Dump BBC Regs
0> 3 Dump Mem Controller Regs
0> 4 Dump Valid DMMU entries
0> 5 Dump IMMU entries
0> 6 Dump Mailbox
0> 7 Dump Schizo regs unit 0
0> 8 Dump Schizo regs unit 1
0> 9 Do soft reset
0> ? Help
0>
0>Selection:
Based on the above error, can I say that DIMM J0100,
J0202, J0304 and J0406 are faulty that causing system
unable to bootup. Also, am I right to place an order
for memory 256MB x 04 (FRU : 501-5401).
Thanks in advance.
Any good docs or website I can find more information
of Sunblade error messages.
Regards,
Andrew
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:24 EDT