From: Dave Martini 1 (martini@mrpeabody.llnl.gov)
Date: Fri Jun 04 2004 - 13:34:56 EDT
I have a d2 array that has a failed disk in it.
It's under Veritas Volume Manager control.
Do I need to issue any commands at the system level before
pulling this disk out other than running vxdiskadm and
removing the disk from Volume Manager?
I know on the A5000 Array's you had to issue the luxadm
command to remove a particular disk device. Is that the case
for the d2 array?
Thank You.
David Martini
LLNL
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:48 EDT