From: Bhavesh Shah (bshah@citadon.com)
Date: Thu May 27 2004 - 13:09:01 EDT
Sorry forgot to add from OK prompt I can see the A1000
ok
/pci@8,700000/scsi@3,1
Target 3
Unit 0 Disk Symbios StorEDGE A1000 0003
Unit 1 Device type 20 Symbios StorEDGE A1000 0003
Unit 2 Device type 20 Symbios StorEDGE A1000 0003
Unit 3 Device type 20 Symbios StorEDGE A1000 0003
Unit 4 Device type 20 Symbios StorEDGE A1000 0003
Unit 5 Device type 20 Symbios StorEDGE A1000 0003
Unit 6 Device type 20 Symbios StorEDGE A1000 0003
Unit 7 Device type 20 Symbios StorEDGE A1000 0003
-----Original Message-----
From: Bhavesh Shah
Sent: Thursday, May 27, 2004 10:04 AM
To: sunmanagers@sunmanagers.org
Subject: Diff SCSI Controller in Sun Fire 280R
Hi Gurus,
I have Sun Fire 280R Box where I have connected A1000 with PCI Diff SCSI
Controller in slot PCI2 and am getting following error messages while
booting:
And sits there forever.
WARNING: /pci@8,700000/scsi@3,1 (glm3):
Connected command timeout for Target 3.0
WARNING: /pci@8,700000/scsi@3,1 (glm3):
Target 3 reducing sync. transfer rate
WARNING: /pci@8,700000/scsi@3,1 (glm3):
got SCSI bus reset
WARNING: /pci@8,700000/scsi@3,1 (glm3):
Connected command timeout for Target 3.0
WARNING: /pci@8,700000/scsi@3,1 (glm3):
got SCSI bus reset
The same A1000 I connect to E 3500 works fine where we have S-BUS Diff
SCSI controller.
The PCI Diff SCSI controller is new.
Any Help will be greatly appreciated.
Thanks
B
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:44 EDT