From: Tim McLaurin (tim@telesurf.com.kh)
Date: Tue May 25 2004 - 09:34:06 EDT
Hi,
SunFire v120
I am having a problem with using the LOM console. When I apply power to the
system the LOM gives the first output of what is doing, booting etc PSU, TEMP
etc... and then any subsiquent output is in strange ASCII code. I can not see
the lom> prompt. Ican't issue commands to the console. When I boot the
machine, all boot msgs are outputed as werid ASCII code, and console line is
unuseable. I can telnet to the box etc and everyhting else seems fine. I just
need to be able to console to re-format one of them.
Thanks in advance,
Tim McLaurin
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:43 EDT