From: N. Z. (nizan1372@yahoo.com)
Date: Mon May 17 2004 - 15:43:28 EDT
Hello,
Using Jumpstart, how can I configure it so that when
it partitions the drive, have it specifically use
cylinder0 for the / partition?
Heres' what my profile currently looks like:
install_type initial_install
system_type standalone
partitioning explicit
filesys rootdisk.s0 4096 /
filesys rootdisk.s1 4050 swap
filesys rootdisk.s3 3072 /usr
filesys rootdisk.s4 30 unnamed
filesys rootdisk.s5 2048 /opt
filesys rootdisk.s6 1024 /tmp
filesys rootdisk.s7 free /var
cluster SUNWCall
And this is how the partition table ends up being
configured:
partition> p
Current partition table (original):
Total disk cylinders available: 7506 + 2 (reserved
cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 1761 - 3541 4.00GB (1781/0/0) 8392072
1 swap wu 0 - 1760 3.96GB (1761/0/0) 8297832
2 backup wm 0 - 7505 16.86GB (7506/0/0) 35368272
3 usr wm 3542 - 4877 3.00GB (1336/0/0) 6295232
4 unassigned wm 4878 - 4891 32.21MB (14/0/0) 65968
5 unassigned wm 4892 - 5782 2.00GB (891/0/0) 4198392
6 unassigned wm 5783 - 6228 1.00GB (446/0/0) 2101552
7 var wm 6229 - 7505 2.87GB (1277/0/0) 6017224
We'd like to /, /var, /usr use the lower numbered
cylinders if possible.
Thanks for your help.
__________________________________
Do you Yahoo!?
SBC Yahoo! - Internet access at a great low price.
http://promo.yahoo.com/sbc/
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:40 EDT