From: pascalgrostabussiat@bredband.net
Date: Mon May 17 2004 - 07:40:26 EDT
Hi all,
The problem I have is as follows: a V880 connected, 2 Silkworm 3800,
3510FC with 2 controllers in redundant mode. Solaris 9 installed. The
problem is that configured and mapped LUNs do not show up in format.
3510 FC have been configured with on Raid5 LUN, controllers are
configured in redundant mode, point-to-point fiber connection, Logical
Drive has been partitioned and partitions have been mapped to host on channel 0. Both controllers are connected to switches, links are up
and speed is ok, switches show F-ports which is correct, HBA are
QLogic cards single 2Gb.
Everything has been installed on the host, Solaris 9, Recommended
Patches, SES packages for the 3510 FC, SAN 4.4 with drivers etc ...,
patches for HBAs according to release notes, sccli updated to v1.5
along with other SES packages. The only thing that has not been done
yet is to upgrade firmware on the 3510 FC to 3.27R but this won't
help anyway (talked to Sun). Everything else is "default".
Probe-scsi-all shows 3510 FC and LUNs correctly, BUT, after booting
no LUN can be found using format !? the only thing that format reports
are internal FC-disks in the V880. Using sccli shows "no device to
managed" !? Everything looks/seems fine using ssconsole (out-of-band).
Any help greatly appreciated !
Regards,
/Pascal
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:40 EDT