Update: bge 10mbps trouble

From: Mats.Oberg@tietoenator.com
Date: Fri May 07 2004 - 03:32:44 EDT


Well, I still haven't found any solution to my problem, got a couple of
answeres that suggested setting the interface to 10-hdx with ndd which doesn't
help. ( I even tried full duplex, hard settings on both card and switchport )

The problem seems to be with routing, since there's no problems inside the
machines subnet.

It's probably neither cable nor switchport, since I've tried the machine
connected to two different switches with different cables.
There is also no problem running a ultra5 in the same port via the same cable
as the problem machine, which by the way is a SunBlade1500 running
Solaris8-hw7-03, recently patched.

The machine works for a while when just started(or if I down/up the
interface), there's no problems accessing for instance the internet. Then
after a random time routing seems to stop, I can't even ping the
defaultrouter(works from all other machines though). I can however
ping/connect to any machine in the same subnet.

The only errormessage is "nfs server ... not responding"

The default route is in the routing table, and it's macaddress is in the arp
table.... I'm really getting frustrated at this....

Anyone have an idea?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:37 EDT