From: ananth p rao (apr_2000@yahoo.com)
Date: Thu May 06 2004 - 00:50:47 EDT
hello everybody,
I am having a problem with Sun V880 server.The System
has a Sun stor edge PCI dual ultra3 scsi controller on
which i have a LTO drive(200/400 gb) is connected
externally.The system recognizes the LTO drive as
Ultrium drive at OK prompt.But if i do a boot -r it
does not create the device files under /dev/rmt
directory.
Even devfsadm -i st fails to configure the drive.I
have gone through the release notes on the WEB which
says that i need to load drivers SUNWqus,SUNWqusx and
SUNWqusux drivers which i have done.I have also
loaded recommended patches and also PATCH number
112697-04.Inspite of this the device fails to get
recognized.
The command devfsdam -i st throws the following error:
driver failed to attach st Any body has faced this
problem.Pls help
Thanks
rao
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
http://hotjobs.sweepstakes.yahoo.com/careermakeover
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:36 EDT