From: Dave Lowenstein (dlowenst@mail.sdsu.edu)
Date: Wed May 05 2004 - 17:10:55 EDT
i need to add an emulex hba to a 420 to attach it to a storage network.
For the quickest data xfer of the old data to the new i'd like to take the
hba that is in the 420 which is attached to a t3, and move it to a
different pci slot. The reason is that the old card is in the 64 bit pci
slot which is where i want my new 2 gb hba.
will i run in to any problems if i move a pci card from one slot to
another and then reboot and mount the t3's disks? Would I need to do a
boot -r to see the new card in the new slot?
Dave Lowenstein
Analyst/Programmer
Instructional Technology Services
San Diego State University
(619)594-0270
http://www-rohan.sdsu.edu/dept/its
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:36 EDT