MEM_malloc: No memory big enough avaliable

From: Barry Deevey (barry.deevey@enmo.co.uk)
Date: Wed May 05 2004 - 07:48:29 EDT


Hi all,

I have a Netra T1 that which will not boot to the OK prompt. When it is
powered on, it immediately displays the following message:

**********************************************
MEM_malloc: No memory big enough avaliable [size=00000050]

**********************************************
PSTATE=0000000000000015 TBA=000001fff0000000 DCU
Control=0000000000000000
AFSR=0000000000000000 AFAR=ffffffff81018338 PIL=000000000000000f
I-SFSR=0000000000000000 D-SFSR=000000000076003d D-SFAR=000000ffffffe2bf
TL=0001 TT=0034 TPC=000001fff000b46c TNPC=000001fff000b470
**********************************************

This message then continually scrolls with only the D-SFAR value changing.

I've replaced the memory, but it did not make any difference. (the memory
that I took out worked fine on another T1) I also tried changing the
bootmode at the LOM to reset_nvram and diag, but nothing I did made any
difference, literally, as soon as the power button was depressed the above
message was displayed.

Unfortunately this box does not have any hardware support on it.... any
suggestions as to what might be wrong or anything I could try??

Thanks,

Barry.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:36 EDT