From: Paul Porcelli (Paul.Porcelli@aggreko.co.uk)
Date: Tue May 04 2004 - 11:48:55 EDT
Hi folks,
I have just removed a working Multitech MultiModem ZDX
from an E3000 running Solaris 6
and plugged it into the 9 pin serial port on a new V440
running Solaris 8
I used admintool to configure the Modem on /dev/ttya as
for dial out only.
i.e.
# pmadm -l
PMTAG PMTYPE SVCTAG FLGS ID <PMSPECIFIC>
zsmon ttymon ttya u root /dev/term/a - -
/usr/bin/login - 9600 ldterm,ttcompat login: - - n #Modem - Dial-Out Only
I have added the following entry to /etc/remote
hardwire2:\
:dv=/dev/cua/a:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:
If I now try to tip to the modem i get the following error:
# tip hardwire2
all ports busy
Any ideas what is happening and how to fix it ?
Many Thanks.
Paul
Visit us at http://www.aggreko.com
Confidentiality Notice: This communication and any accompanying attachments
contain confidential information intended for a specific individual and
purpose. This communication is private and protected by law. If you are not
the intended recipient, you are hereby respectfully notified that any
disclosures, copying, forwarding or distribution, or the taking of any action
based on the contents of this communication is strictly prohibited.
_____________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:36 EDT