move boards (15K server)

From: mmelnik@entelsa.entelnet.bo
Date: Thu Apr 29 2004 - 14:57:11 EDT

• Next message: Jeff Horwitz: "how to clear a stale soft partition"
• Previous message: sunsa_tx@yahoo.com: "replace 36gb encapsulated and mirrored boot disks with 72gb disks"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Gurus

I need help with my 15K server, the problem description is:

I have two domains with this components:

Available Component List for Domains:
=====================================
Available Component List for domain B:
 SB2 SB3 SB4
 IO2 IO3 IO4

and other domain with this:

Available Component List for Domains:
=====================================
Available Component List for domain F:
 SB3 SB4 SB7
 IO4 IO7

In the component IO2 from domain B I have 2 processors, and this processors
I need now in
the domain F, I run the command "moveboard -d f IO2" and the result is:

IO2 is already assigned to domain: F. Skipping assignment.
assign IO2
assign IO2 done
poweron IO2
poweron IO2 done
test IO2
moveboard: Hardware specific failure: test IO2: Board test failed

ERROR: Unable to connect/configure component.

please any help......

Mauricio Melnik

PD.- sorry with my english...
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Jeff Horwitz: "how to clear a stale soft partition"
• Previous message: sunsa_tx@yahoo.com: "replace 36gb encapsulated and mirrored boot disks with 72gb disks"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:34 EDT