From: Barry Callahan (barryc@rjlsystems.com)
Date: Wed Apr 28 2004 - 14:27:17 EDT
I've got an Ultra-2 that recently went down as a result of a power failure.
After restoring power, the machine refused to boot to the internal disk.
Booted to a Solaris install CD so I could run format to check the disks, and it
turns out that the disk that WAS the bood disk is now no longer formatted (and
apparently unlabeled) :(
Set diag-level=max and diag-switch?=true, then used a laptop to log all of the
output from the POST to make sure everything else is ok. The logfile's
attached.
I don't see any messages saying anything is wrong, but instead of saying
Status = PASS
near the end, it says:
Status = 0000.0000.0000.0000 0000.01ff.f007.87f0 1f66.0000.01c1.0105
Would anyone be able to help me figure out what these two non-zero codes mean?
Thanks.
Barry
[demime 1.01b removed an attachment of type APPLICATION/octet-stream which had a name of test1_post.TXT]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:28:33 EDT